Home > Industrial Products > Beckhoff | EtherCAT Terminal, EL3356-0000/EL3356-0010/EL3356-0020/EL3356-0030/EL3356-0090
Skip to product information
1 of 2

Beckhoff | EtherCAT Terminal, EL3356-0000/EL3356-0010/EL3356-0020/EL3356-0030/EL3356-0090

Beckhoff | EtherCAT Terminal, EL3356-0000/EL3356-0010/EL3356-0020/EL3356-0030/EL3356-0090

SKU: EL3356-0000-0010-0020-0030-0090-BECKHOFF-ETHERCAT-TERMINAL

Regular price $370.00
Regular price Sale price $370.00
Sale Sold out
Suffix

When you see these red characters, it means that these prices are not transaction prices, they are for reference only. We will not accept the payment if you pay directly without getting a quote from us.

How to get buy this product?

Method A: You can send a message, then we will contact you. After we update the latest price, then you can make an order.

Method B: You can add this product into the cart and complete the order without payment. Then we will contact you and you can make payment after we send you a new order with an updated price.

RuffRuff App RuffRuff App by Tsun

The analog EL3356-0010 input terminal enables direct connection of a resistor bridge or load cell in a 4- or 6-wire connection technology. The ratio between the bridge voltage UD and the supply voltage UREF is determined simultaneously in the input circuit and the final load value is calculated as a process value on the basis of the settings in the terminal. With automatic self-calibration (can be deactivated), dynamic filters and distributed clock support, the terminal with measuring cycles of 100 µs can be used for fast and precise monitoring of torque or vibration sensors.

Technical data EL3356 EL3356-0090 EL3356-0010 EL3356-0020 EL3356-0030
Number of inputs 2, for 1 resistor bridge in full bridge technology
Power supply via the E-bus -
Technology resistor bridge, strain gauge
Signal type differential - differential -
Distributed clocks - yes
Measuring range UD max. ±27 mV max. -25…+25 mV rated voltage
Measuring range UREF max. ±13.8 V max. -12…+12 V rated voltage
Internal resistance > 200 kΩ (UREF), > 1 MΩ (UD)
Conversion time - 0.1…250 ms, configurable, max. 10,000 samples/s
Input filter limit frequency 10 kHz low pass (-3 dB)
Conversion rate - 10,000…4 samples/s (0.1…250 ms conversion time)
Power supply UV up to 12 V DC from power contacts, dependent on sensor
Resolution 16 bit, 32 bit presentation 24 bit, 32 bit presentation
Technical data EL3356 EL3356-0090 EL3356-0010 EL3356-0020 EL3356-0030
Measurement error/ uncertainty < ±0.01 % for the calculated load value in relation to the final load value with a 12 V feed and 24 mV bridge voltage (hence nominal strain gauge characteristic value of 2 mV/V), self-calibration active, 50 Hz filter active
Calibration certificate (analog) - factory calibrated externally calibrated
Current consumption power contacts depends on strain gauge supply, min. 1 mA
Current consumption E-bus typ. 210 mA typ. 280 mA
Supported nominal sensitivity all, parameter resolution: 0.01 µV/V; recommended: 0.5…4 mV/V
Special features self-calibration, quadruple averager, dynamic filters TwinSAFE SC, self-calibration, quadruple averager, dynamic filters self-calibration, quadruple averager, dynamic filters, fast data sampling self-calibration, quadruple averager, dynamic filters, fast data sampling, with calibration certificate self-calibration, quadruple averager, dynamic filters, fast data sampling
Technical data EL3356 EL3356-0090 EL3356-0010 EL3356-0020 EL3356-0030
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/variable
Pluggable wiring for all ESxxxx terminals -
Approvals/markings CE, UL, ATEX, IECEx CE, UL, ATEX, IECEx, cFMus CE, UL, ATEX, IECEx
Ex marking ATEX:
II 3 G Ex nA IIC T4 Gc
IECEx:
Ex ec IIC T4 Gc
II 3 G Ex nA IIC T4 Gc ATEX:
II 3 G Ex nA IIC T4 Gc
IECEx:
Ex ec IIC T4 Gc
cFMus:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx ec IIC T4 Gc
II 3 G Ex nA IIC T4 Gc

 

Housing data EL-12-8pin ES-12-8pin
Design form compact terminal housing with signal LEDs terminal housing with pluggable wiring level
Material polycarbonate
Dimensions (W x H x D) 12 mm x 100 mm x 68 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Marking labeling of the BZxxx series
Wiring solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-section s*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
s*: 0.08…1.5 mm²,
st*: 0.08…1.5 mm²,
f*: 0.14…1.5 mm²
Connection cross-section AWG s*: AWG 28…14,
st*: AWG 28…14,
f*: AWG 26…16
s*: AWG 28…16,
st*: AWG 28…16,
f*: AWG 26…16
Stripping length 8…9 mm 9…10 mm
Current load power contacts Imax: 10 A

*s: solid wire; st: stranded wire; f: with ferrule

 


If you have any questions--about product, cooperation or wholesales, please feel free to leave message below.

View full details

Message